Fitted wardrobe built around a stair bulkhead
A floor-to-ceiling shaker wardrobe built into an awkward corner, worked around the stair bulkhead running across the bottom of the wall.
SERVICE
Fitted wardrobes
The wall had a stair bulkhead crossing the bottom of it, which is exactly the sort of thing that stops an off-the-shelf wardrobe from fitting.
The carcass was built to the space instead: full-height doors above, and a lower boxed section following the line of the bulkhead with an access panel let into the front of it.
Scribed to the ceiling and to both walls, and painted to match the room so it reads as part of the house rather than furniture pushed up against it.
More work
More of the work
Other jobs we have finished across Bridgend county and Cardiff.
Green oak porch, cut and pegged on site
A green oak gable porch framed and pegged on site, sat on carved padstones, with a reclaimed brick path laid up to the door.
Loft boarded out over full-depth insulation
A raised loft deck with the legs screwed down onto the joist tops, so the insulation underneath stays at full depth.
Worth reading
Worth reading
The questions people ask before booking a visit.
Alcoves
Alcove shelving: getting both sides level when the chimney breast is not central
The two alcoves either side of a chimney breast are almost never the same. Here is how to stop that showing.
Doors
Internal doors: reusing your frames or fitting new linings
New doors on old frames is the cheaper job until it is not. How to tell which one you have.